V-ZUG CookTop V4000 I302, Руководство по эксплуатации

Страница: 9 / 28

3 Your appliance
3.4 Pan detection
Each cooking zone is equipped with pan detection. This detects suitable induction com-
patible cookware with a magnetic base.
▪ If the cookware is removed during operation or if unsuitable cookware is used,
– the power level selected flashes alternately with .
▪ If no suitable cookware is placed on the cooking zone before the pan detection time
(10 minutes) elapses,
– the cooking zone switches off.
– the display changes from to .
– the appliance switches off after 10 seconds if no other cooking zone is in use.
3.5 Flexible cooking
In flexible cooking, there are no marked cooking zones.
Pans of any diameter can be used on any cooking zone. must, however, be com-
pletely covered for pan detection.
For even frying, the pan must be centred on . The diameter of the base of the
pan should not be greater than the diameter of the cooking zone.
3.6 Cookware
Suitable cookware
Only cookware with a full magnetic base is suitable for use with the induction hob.
This can be checked in the following ways:
▪ A magnet sticks anywhere on the base of the cookware.
▪ On the hob, the power level set illuminates and does not alternate with the power
level.
Do not heat any unsuitable cookware using aids such as metal rings and the like.
This can damage the hob.
Sandwich base
Capsule base
Multi-layer
material
Pressed base
Cast iron
Enamelled cast
iron
Enamelled steel
9