V-ZUG CookTop V4000 I302, Руководство по эксплуатации

Страница: 17 / 28

5 User settings
4.15 Restore function
If the appliance has been inadvertently switched off with the button, the settings can
be restored within 6 seconds.
▸ Switch the appliance on.
– The indicator light for the button flashes.
▸ Touch the button.
4.16 Pause cooking
With this function, the power level of all cooking zones that are switched on can be tem-
porarily reduced to for up to 10 minutes.
After pause cooking, operation is resumed using the previous settings.
▸ Touch the button.
– The power level of the cooking zone switched on changes to .
– The operating time is interrupted.
– The timer continues to run.
– All buttons are inactive except for , and .
If the pause cooking function is not turned off within 10 minutes, the appliance
switches off completely.
▸ Touch the button again to resume cooking.
– The cooking zones resume operation using the previous settings.
4.17 Wipe protection
This function prevents the power level from being changed accidentally, for instance
when wiping the control panel with a cloth.
▸ Touch the
button.
–
The indicator light for the button illuminates.
▸ Wipe protection is switched off by touching the button again or automatically after
30 seconds.
Touch the button to switch the appliance off at any time.
5 User settings
The following user settings can be set and saved individually:
User setting Setting value Factory
setting
P0 Acoustic signal loudness 0 Low 2
1 Medium
2 High
P1 Acoustic signal at end of
operating time / timer
0 No acoustic signal 2
1 Automatically off after 10 seconds
2 Automatically off after 1 minute
17