V-ZUG CookTop V4000 A604, Руководство по эксплуатации

Страница: 14 / 24

4 Operating the appliance
4.11 Restore function
If the appliance has been inadvertently switched off with the button, the settings can
be restored within 6 seconds.
▸ Switch the appliance on.
– The indicator light for the button flashes.
▸ Touch the button.
4.12 Wipe protection
This function prevents the power level from being changed accidentally, for instance
when wiping the control panel with a cloth.
▸ Touch the
button.
– The indicator light for the button illuminates.
▸ Wipe protection is switched off by touching the button again or automatically after
30 seconds.
Touch the button to switch the appliance off at any time.
4.13 Acoustic signal
Changes can only be made when the timer is not running.
The following tones will still be emitted when the button tone is switched off:
▪ Acoustic signal when the appliance is switched on
▪ Acoustic signal when the appliance is switched off
▪ End of operating time
▪ End of timer (egg timer)
▪ Error tones (e.g. button continuously held down)
▪ Acoustic signals whenever the childproof lock is switched on, overridden or switched
off.
The setting is saved even after a power failure.
Switching the acoustic signal on
▸ Switch the appliance on with .
▸ Touch the and
buttons at the same time.
–
An acoustic signal is emitted.
▸ Touch the slider within 3 seconds.
– An acoustic signal is emitted.
– appears in the display.
▸ Touch the right-hand side of the slider 1×.
– An acoustic signal is emitted.
– appears in the display.
Incomplete entries are cancelled with no effect.
Simply repeat the steps above to turn the acoustic signal on.
The setting is saved on exiting the menu.
The menu can be exited in the following ways:
▸ The setting is saved 10 seconds after last pressing a button.
▸ Switch the appliance off with the button.
14