V-ZUG CombiCooler V6000 Supreme, Руководство по эксплуатации

Страница: 31 / 40

9 Care and maintenance
▸ Ice can build up in the bottom of the FreshBox drawers (if a low temperature has been
set). If this is the case, set the FreshBox temperature to +2 °C, and wipe away the de-
frosted condensate the next day with a dry cloth. If the layer of ice is thick, it may be
necessary to switch off the FreshBox to defrost.
▸ Clean the interior periodically with a mild soapy solution and wipe completely dry.
Do not use water on the electrical parts, light bulbs or control panels.
Risk of damage to the appliance and its parts.
▸ If the appliance is not to be used for a longer period of time, switch it off. Empty and
clean the appliance. Leave the refrigerator and freezer compartment doors open.
9.3 Cleaning and care for the ice-maker
Failure to follow the cleaning and care instructions can affect the quality of the ice
cubes produced.
When using the appliance for the first time and each time after replacing the filter, it is
advisable to discard the ice produced in the first 24 hours.
Clean the ice cube bin regularly simply by holding it under cool, running drinking water.
The filter must be changed whenever the LED on the control panel illuminates or when
the system has not been used for a longer period of time (>30 days).
It is recommended that the ice cube dispensing system be disinfected with a sodium hy-
pochlorite-based disinfectant which is suitable for use on materials that come into con-
tact with food and does not change their properties. Flush the system through with at
least 2 litres of water before use.
9.4 Cleaning the condenser
The condenser is located behind the front ventilation grille in the bottom part of the appli-
ance. Use a vacuum cleaner with a soft brush attachment on full power to clean the slots
in the ventilation grille. If there is a heavy build-up of dust, the ventilation grille can be re-
moved in order to clean the condenser more thoroughly. A reminder appears in the dis-
play every 180 days. Clean the condenser and then reset the countdown reminder. How
to reset the reminder
: Using the functions and settings (see page 14).
▸ Switch off the appliance by pressing and holding the but-
ton for 3 seconds.
▸ Wait for around 30 minutes until the condenser temperature
has reached the ambient air temperature.
▸ Remove the grille below the appliance door(s).
Remove all dust deposits from the condenser, taking care not to
damage it.
▸ Switch the appliance back on by pressing and holding the
button for 3 seconds.
The fins on the condenser are sharp! Use suitable protective equipment for hands
and arms in order to be able to clean the condenser safely.
31