5 Using the appliance functions
Function
Description
Temperature unit Switching the unit of temperature.
°C / °F
▸ Touch the
button.
▸ Select the
button until
appears flashing.
▸ Confirm with the
button.
Demo mode*
This setting enables specialist retailers to put the appliance into
the showroom mode for demonstration purposes. The demo
mode enables functions to be demonstrated without the appli-
ance being switched on.
Note(*): This setting is not recommended for private use because
no cooling takes place in the refrigerator.
Activating
▪
The demo mode can only be turned on when
the appliance is switched off.
▸ Hold the
button depressed and at the
same time long press the
button.
–
The demo mode is activated.
–
The display element is shown.
Deactivating
▪
The demo mode can only be turned off when
the appliance is switched off.
▸ Hold the
button depressed and at the
same time short press the
button.
–
The demo mode is deactivated.
–
The display element is no longer shown.
5.1
Brief description of the appliance functions
SilentPlus
This operating mode is designed to produce low noise emissions. The energy consump-
tion of the appliance may be slightly increased. Since the appliance is quiet during nor-
mal operation, the effect of SilentPlus is particularly perceptible at higher ambient tem-
peratures. In addition, the appliance reacts to the door being frequently opened or warm
food being loaded in a particularly noise-optimized way in the SilentPlus mode compared
to normal operation. SilentPlus is temporarily interrupted while PartyCooling and fast
cooling/freezing are running. The setting range of the temperature zones is limited
through SilentPlus.
PartyCooling
PartyCooling temporarily provides generally increased cooling capacity whereby the tem-
perature of the refrigerator compartment is lowered to the coldest value. The appliance
can thus react better to the effect of opening the door frequently and loading warm food.
This increases the noise emissions and energy consumption of the appliance. PartyCool-
ing can be set to run 12, 24 or 48 hours. SilentPlus is interrupted for the duration for ap-
plication-related reasons.
16
