2
Using for the first time
Before operating the newly installed appliance for the first time, the following steps
should be taken:
▸ Remove packaging and transport materials as well as any protective blue film from
out of the cooking space.
▸ Clean the cooking space and accessories.
▸ Long touch the display.
–
The appliance starts.
–
Various user settings necessary for operation appear in the display one after the
other.
▸ Make the settings and confirm.
▸ Remove all the accessories from out of the cooking space.
▸ Start the initial burn-in.
If the initial burn-in step is skipped, it must be carried out manually after completing
the initial set-up.
▸ Heat the empty cooking space (without wire shelves, baking trays, etc.) to 200 °C
for about 30 minutes using the
application «Hot air».
As there is likely to be some smoke and odour given off during the initial burn-in,
we recommend ventilating the room well during this phase.
All temperatures in these operating instructions are given in degrees Celsius (°C).
9
