4 Operation
Selecting an application
▸ Select the desired application using the CircleSlider.
–
Choose an item in the list by swiping, navigating and touching it.
▸ Touch the desired application and press «OK» or touch the application again.
–
The ready to start screen or another submenu with more applications appears in
the display.
▸ If required, repeat the procedure and select the desired application until the ready to
start screen appears in the display:
1
15min
13:21
Hot air
Start
Adjusting values
▸ If necessary, adjust the main value
1
using the CircleSlider (see page 21).
▸ If necessary, touch
and define, adjust or activate the values of other options (see
Saving values
▸ Permanently save and pin the adjusted main value
1
for the selected application, if re-
▸ Touch
and create a favourite, if required (see page 23).
Starting an application
▸ Press «Start» to start the application.
–
The pulsing circle
2
of the CircleSlider indicates that operation has started.
–
The progress bar
3
in the CircleSlider shows the countdown to the time remaining
or the preheating status of the set application, if set.
210°C
15min
13:21
Hot air
2
3
Stop
16
