V-ZUG AiroClearCabinet V400, Руководство по эксплуатации

Страница: 13 / 24

4 Care and maintenance
Resetting the saturation indicator
With the appliance switched on, hold the button depressed for 3 seconds to reset the
saturation indicator.
▸ The
(power level) and (intensive level) displays illuminate for 2 seconds if reset
correctly.
If both the and displays are flashing after the reset, the reason for this is: the
metal grease or activated charcoal filters are also dirty and must be cleaned or re-
placed.
4.3 Long-life activated charcoal filter
The long-life activated charcoal filter must be cleaned and reactivated bimonthly with nor-
mal use or whenever the saturation indicator flashes. If properly cared for, the service life
of the long-life activated charcoal filter is 3 years.
Disconnect the appliance from the mains and unscrew the fuse for the appliance
or switch off the circuit breaker.
Removing
▸ Pull the deflector plate completely out
and remove both grease filters.
▸ Push bar 1 and move the activated
charcoal filter unit 2 down and out of
the bracket.
▸ Remove the activated charcoal filter
mat 3 from its frame 4 .
1
2
4
3
Cleaning and reactivating
▸ Clean the activated charcoal filter mat 3 in the dishwasher.
▸ Select an «intensive» or «heavy» dishwasher programme with a warm prewash. Wash
separately so that no food debris can become stuck to the activated charcoal filter
mat filter
3 .
13