V-ZUG AiroClearCabinet V400, Руководство по эксплуатации

Страница: 11 / 24

4 Care and maintenance
3.8 Saturation indicator
Metal grease filters
The (power level) and (intensive level) indicators flash alternatively after 40 operat-
ing hours. The saturation level has been reached and the metal grease filters must be
cleaned.
Long-life and standard activated charcoal filters
The (power level) and (intensive level) indicators flash simultaneously after 160 op-
erating hours. The saturation level has been reached. The long-life activated charcoal fil-
ter has to be cleaned and reactivated. The standard activated charcoal filter cannot be
reused and must be replaced.
Only activate this function if the appliance is being used in the recirculation mode.
4 Care and maintenance
4.1 Cleaning the housing
Take care that no water gets into the housing of the appliance! If water gets into
the housing, it can cause damage.
Do not use abrasive cleaners, scouring pads, steel wool, etc. for cleaning, as they
can damage the surface. Disconnect the appliance from the mains and unscrew
the fuse or switch off the automatic circuit breaker.
Cleaning the outside/inside
▸ Clean the outside of the appliance with a warm, damp cloth and a little detergent and
then wipe dry.
– Grease and condensate water can build up on the inside around the metal grease
filters.
▸ Clean with a warm, damp cloth and a little detergent – you can also use a brush if ne-
cessary – and then wipe dry with a kitchen towel.
11