11 Trouble-shooting
Display
Possible cause
Solution
Hygiene recom-
mendation
▪
No wash cycle has
been carried out at a
temperature of at least
60 °C for a longer
period of time.
▸ With one of the next wash cycles
carry out a wash with at least 60° C.
Inlet water very
cold:
Heating extended
▪
Inlet water is very cold.
Heating is extended.
▸ No action is necessary.
Too many items:
Heating extended
▪
The selected pro-
gramme is intended for
a smaller load. Heating
and possibly rinsing is
extended.
▸ Adjust load to the max. load size.
Large unbalanced
load:
Spin extended
▪
The appliance optimizes
the distribution of the
wash load to com-
pensate an unbalanced
load. The final spin is
extended.
▸ Wash large and small items together
to avoid large unbalanced loads.
11.2
Other possible problems
Problem
Possible cause
Solution
The washing has
not been spun or
has been spun in-
sufficiently.
▪
The spin speed set is
too low.
▸ Increase the spin speed for the next
▪
Large unbalanced load
in the washing drum
▸ Wash large and small items to-
gether.
▪
«Steam anti-crease»
was selected and the
appliance was not
standing level.
▸ Optimize appliance set-up according
to installation instructions.
The appliance vi-
brates heavily
when spinning.
▪
The transport lock has
not been removed.
▸ Remove transport lock.
▪
The feet of the appli-
ance are not properly
adjusted.
▸ Set appliance feet so that the appli-
ance stands level.
▪
The load could not be
optimally balanced in
the washing drum.
▸ Wash large and small items to-
gether.
At the end of the
programme, the
appliance door
cannot be opened
with the
but-
ton.
▪
The appliance door is
stuck.
▸ Press hard against the lock area of
the appliance door (i.e. front edge of
appliance door).
▸ Touch the
button again.
▪
An interruption in the
power supply.
▸ Use the emergency door
33
Содержание AdoraWash V2000
Страница 1: ...Operating instructions AdoraWash V2000 Washing machine...
Страница 44: ...44 17 Notes...
Страница 45: ...45...
Страница 46: ...46...