10 Care and maintenance
Hot water connection
Selection
If the appliance has a hot water connection
and the setting is activated, optimum use is
made of the hot water available.
For the «No heating» setting: only enable if
the inlet water is 60° C. The dishes may not
be completely dry by the end of the pro-
gramme. Leave the dishes in the appliance
(e.g. overnight) to dry.
▪
: Activated
▪
: No heating
▪
: Deactivated (factory setting)
Deleting favourites
Selection
Touch «Delete» and confirm the prompt to
delete all the favourites.
▪
: Deleting
Factory setting
Selection
With «YES», all user settings are reset to the
factory settings.
▪
YES
▪
NO
Service settings
The service settings are only available for use
by service staff.
10
Care and maintenance
10.1
Cleaning the interior and exterior
Cleaning the interior
Using the correct dosage of detergent will automatically clean the interior of the appli-
ance. The appliance should be additionally cleaned twice a year with dishwasher
cleaner.
▸ Follow the instructions for use for the dishwasher cleaner.
▸ Select the «Machine care»
programme as dishwasher cleaners work more effect-
ively at higher temperatures.
Cleaning the exterior
▸ Do not use abrasive or caustic cleaning agents.
▸ Do not use scouring pads, steel wool, etc. as they can damage the surface.
▸ Remove any soiling or excess cleaning solution immediately. Only use washing-up li-
quid or glass cleaner.
▸ Clean the surfaces with a soft, damp cloth only – for metal surfaces rub in the direc-
tion of the polish lines.
▸ Clean the operating panel with a damp cloth and then wipe dry. Only use washing-up
liquid or glass cleaner.
▸ Regularly clean the door seal and edges with a soft, damp cloth.
44
Содержание AdoraDish V6000 OptiLift
Страница 4: ...4 15 Notes 60 16 Service Support 63...
Страница 60: ...60 15 Notes...
Страница 61: ...61...
Страница 62: ...62...