… User settings
23
Rinse aid dosage
The rinse aid dosage is automatically adjusted to the load level and the water
hardness. If the drying result is unsatisfactory, then the dosage can be adjust-
ed manually between
for «OFF» to
for «Level 12».
䡲
If the dishes are still wet or there are water spots, set the rinse aid dosage
to
«Level 4» or higher.
䡲
If the dishes are streaky, set the rinse aid dosage to
«Level 3».
Changing the rinse aid dosage
A
Hold the
button depressed for 5 seconds (to enter the configuration
mode).
A
Press the
button 4×.
–
appears in the digital display for automatic (factory setting).
A
Press the
button to change the setting.
A
To exit the configuration mode, press the
button repeatedly until the
digital display goes out.
