![background image](http://html2.mh-extra.com/html/v-zug/173/173_operating-instructions-manual_3095741032.webp)
8 Trouble-shooting
... A9 flashes or A11 appears in the display
A9 Clean filters
and mat
A11 Clean heat pump and
cooler filter
Possible cause
Solution
▪
The following parts in the
appliance could be
blocked:
–
Door filter
–
Door filter mat in door
filter
–
Front filter mat in front
filter
–
Evaporator
–
Cooler filter
▸ Check and, if necessary, clean the parts (see page
23).
▸ Acknowledge the message by touching the
button.
▸ Start programme.
If the error appears again:
▸ Note down the message in full and the manufacturer’s
or serial number (FN or SN).
▸ Disconnect the power supply.
▸ Inform the caretaker, the owner of the appliance or the
property management company.
▪
High ambient temperat-
ure
▸ Improve the ventilation of the room.
▪
The load is too wet/
heavy.
▸ Spin washing at higher speed / reduce size of load.
... in the display appears
FXX / EXX See instructions
FN XXXXX XXXXXX
Possible cause
Solution
▪
Various situations can
lead to a
«F message».
▸ Acknowledge the error message by touching the
button.
▸ Turn the power supply off for about 1 minute and then
turn it back on again.
▸ Next select a programme.
If the error appears again:
▸ Note down the message in full and the manufacturer’s
or serial number (FN or SN).
▸ Disconnect the power supply.
▸ Call Customer Services.
▸ Inform the caretaker, the owner of the appliance or the
property management company.
32