8 |
P a g e
Maintenance, cleaning and repair
Only perform the maintenance work described in this booklet on the equipment. In case of
uncertainty, contact the dealer or an authorized service centre.
Before performing any cleaning or maintenance operations upon the device, remove both
the electrical and compressed air power supply cables. Treat the device in a responsible
manner so as to avoid creating situations which could be dangerous to both yourself, as well
as to others.
A filtered, forced air ventilation system must be employed during maintenance activities. The
user must wear any appropriate safety accessories during such operations, especially
respiratory protection. The environment in which maintenance activities are to be performed
must be decontaminated in order to prevent the dispersion of hazardous substances into the
surroundings.
When transporting the device away from or within an area that is contaminated with
hazardous substances, the external portion of the device must be vacuumed and wiped
down with a cloth before sealing it in an air-tight container.
Any parts which cannot be cleaned must be packaged in air-tight bags and/or disposed of
in compliance with the current regulations for the disposal of hazardous substances in the
country of use.
The manufacturer requires that the vacuum be subjected to an annual technical inspection.
This inspection may be performed by an authorised distributor’s technician and must include
the examination of the aspiration filters, the air-tight seals, as well as the signalling
components/indicators.
DESCRIPTIVE INFORMATION
Detailed use of the machine
ATTENTION The vacuum cleaner is suitable for extracting dry non-flammable dusts, wood
the hazards presented by the dusts to be aspirated, the vacuum must be equipped with
appropriate filters: see the following sections.
For the Pneumatic System:
The device is designed to function at pressures ranging from a minimum of 4 bar to a
maximum of 15 bar. Below 4 bar, the device’s automatic start-up function is not guaranteed.
Never exceed the 15 bar pressure limit.
BEFORE FIRST USE
Vacuum assembly and testing
Before using the device, check that:
No foreign elements are present within the container.
Ensure that the head if fastened down with the head clips. This guarantees an air-tight seal.
The relevant filters and bag have been installed. The bag is equipped with a membrane seal
which must be fitted over the internal slot of the tank intake. It also has a complete orifice
seal tag which must be applied once the used bag is removed from the tank intake for safe
disposal. This is important to ensure that the contained dust does not escape.
The hose is correctly connected to the tank.
the machine is connected to the correct electrical supply.
Initial working phase check
Before beginning to vacuum dusts with MaK values, check that the filters fit properly within
the device and that they are positioned correctly.
Содержание VacM
Страница 11: ...11 P a g e...