V-TUF VacM, Руководство пользователя, Страница: 4 / 12

4 | P a g e
Holes and/or cuts on the sides of the filter could allow transit of dust / materials and become
the cause of serious damage to the user and surrounding people, and the appliance.
3. Check and free the blocked parts (vacuum pipes, connector, brushes, etc.) from any
deposited materials.
4. If necessary, clean the tank and in any case, never leave dust or liquid residues in the tank
for long periods of time.
IMPORTANT INFORMATION
Never use the machine if you are unsure, or become uncertain due to any faults of any kind,
including those not mentioned in this manual.
Technical Information
Model VacM
Capacity 21 Litres
Working Voltage 110 & 240 Volts
Motor Power 1400 Watts
Function Dry Vacuuming
Air Flow Rate 215 M
3
/H
Cooling Mode 250mm
Tank Diameter 335mm
Height 250mm
Accessories Ø36mm Accessories Kit
Power Cable 8.5m
Safety Instructions
These instructions are for the user’s safety, and all users of the V-TÜF cleaning equipment
should ensure to have read this literature before using the machine.

Do not use with a damaged cable.

Do not run over the cable.

Should be inaccessible for children and pets.

Do not use in the presence of flammable gasses.

Do not clean up any hot material, e.g. ash.

Always turn off the machine, and then unplug it, before you service the machine.

Do NOT use this machine without the filters, as this is a health hazard and motor
damage will also come as a result.
All repairs on V-TÜF products should be done by a V-TÜF service representative.

If the machine shuts down, be sure to turn off the machine and unplug it before
troubleshooting.

For safety, the machine contains an electronic overload protection.

Always turn off and unplug the machine when it is not in use.

If any part of the appliance becomes damaged or fractured, it must be replaced by
a V-TÜF engineer.