V-TUF tufTURBO410, Руководство оператора, Страница: 2 / 6

2
WARNING:
To reduce the risk of injury, user must read and understand the operator’s manual for their pressure washer before using this
accessory. Fits most pressure washers. Ensure compatibility and proper fit before using this accessory. Wear eye protection
marked to comply with Z87.1. Risk of fluid injections. Do not point at people, pets, electrical devices or the unit itself. Turn off the
pressure washer before changing or adjusting accessories. For cold water use only. Save these instructions. Refer to them
frequently and use them to instruct other users. If you loan someone this tool, loan them these instructions also.
PRODUCT SPECIFICATIONS
• V-SPIN - High Speed Swivel Technology
• Inlet stainless steel swivel for cleaning from any angle
• 16" 410mm Wide Stainless-Steel Cleaning Deck
• 4000 PSI / 275 BAR - Max Pressure
• 40 L/MIN Max Flow
• 150°C Max Temperature - Works with Soft Wash Kit
• Compatible with the V-TUF DuraKLIX SSQ Quick-Release Coupling Cleaning System
No assembly required – just connect to a pressure washer lance as shown in H1.005TT_4, H1.005TT_5
WARNING:
To reduce the risk of injection or injury, only use the surface cleaner on flat, horizontal surfaces. Never lift the surface cleaner
from the cleaning surface while operating the pressure washer.
USING THE SURFACE CLEANER
See Figure 5.
Attach the high pressure gun of your pressure washer to the inlet plug on the surface cleaner.
Connect the garden hose to your pressure washer and start the pressure washer as described in your pressure washer manual.
Walk slowly behind the cleaning deck, cleaning as you go.
NOTE: If striping or swirling occurs, slow your pace. If striping or swirling continues, the surface cleaner skirt bristles may be
worn and in need of replacement.
Figure 5.