manualshive.com logo in svg

V-TEK TM-403, Руководство пользователя, Страница: 44 / 306

Поделиться
Скачать
V-TEK TM-403 Скачать руководство пользователя страница 44

3-2

TM-403 User’s Guide 

Introduction

D292106.6b.fm

Introduction

This chapter gives an overview of the TM-403 

Human Machine Interface (HMI)

, defining the but-

tons, screens and setting options that allow the operator to customize the TM-403’s performance
to their taping needs.

Note: 

Proceed to 

Chapter 4: Setup

 for instructions on how to configure the HMI, to 

Chap-

ter 5: Vision Setup

 for instructions on configuring the vision system and to 

Chapter 6: 

Operation

 for instructions on how to run a job.

Touch Screen

The user interacts with the TM-403 through a touch screen HMI which is located on the front of
the machine below the 

Taper

. Touching the HMI screen has the same effect as a left click with the

mouse. Although only lightly touching the buttons or data fields is necessary for activation, the
action is referred to as “pressing” in this manual. 

Note

: Use care when operating the touch screen and do not use any objects other than a 

finger to touch the screen. A stylus can also be used to click the various buttons. 

Содержание TM-403



















































































































































































































































































































Отзывы:

Нет отзывов