V-TEK TM-403, Руководство пользователя, Страница: 174 / 306

6-12 TM-403 User’s Guide
Preparing to Run a Pre-programmed Job D292106.8b.fm
Run the Job
1. Close the enclosure doors, then open the HMI Run Tab and press Run .
During operation, the operator will add additional parts to the Tape Feeder and
unload packaged parts from the Taper as necessary. The operator may also
replace parts that fail 2D Inspection. Otherwise no other adjustments are required
for a job that has already been defined properly.
2. When the preset number of parts has been run, the TM-403 will automatically stop
operation.
3. Cut the sealed tape at the cut point and use a piece of blue Permacel tape to
secure the finished reel. Remove processed output.
Step 8:
Run
Job