V-TEK TM-403, Руководство пользователя, Страница: 109 / 306

D292106.7b.fm Configure HMI Settings
Chapter 4: Setup 4- 25
• If rotation is set at 0 ,
the part will be placed
in the same orientation
as it was picked.
• If rotation is set at -90 ,
the part will be rotated
90 degrees clockwise
prior to placement.
• If rotation is set at +90 ,
the part will be rotated
90 degrees counter-
clockwise prior to
placement.
b. Press the right Arrow Key to move to the next Job Wizard screen.
13. Verify Job Settings
Test the job settings, using the Pick Part and Place Part buttons to pick and
place parts. If adjustment are required, use the left Arrow key to return to the
desired step and adjust settings. Press the right Arrow Key to move to the next
Job Wizard screen.
Note: Manually placed parts will be counted in the current job.
-90
0
+90
Rotation Options
Step 6:
Setup HMI
NOZZLE
Step 6:
Setup HMI
VERIFY