INSTALLATION INSTRUCTION
LED CEILING DOME LIGHT
LED Chip: AC220 – 240V, 50/60 Hz
WEEE Number: 80133970
Thank you for selecting and buying V-TAC LED Daylight Sensor. V-TAC will serve you the best. Please
read these instructions carefully before starting the installation and keep this manual handy for
future reference. If you have any other query, please contact our dealer or local vendor from whom
you have purchased the product. They are trained and ready to serve you at the best.
• This ceiling lighting fixture is with LED diode, which has technology advantage, energy savings, and
environmental protection, long life span, saving electricity cost and almost no maintenance time
and cost needed.
• It has 100% efficiency and brighter than any other old fixtures.
• No maintenance, easy to install, high efficiency, low electricity, power saving, long life span,
low temperature.
• Lighting installation should not be covered. Leave some spaced around the fixture
for ventilation.
• Risk of shock, hence disconnect at fuse or circuit breaker before installation or servicing.
• Risk of fire, supply conductors (power wires) conneting fixture must be rated
minimmum 90°C. If uncertain, consult electrician.
• Turn off the power before inspection, installation or removal.
• Please do not exceed the rated voltage or wattage.
!WARNING
PRODUCT FEATURES
NOTES
INTRODUCTION
