V-fit Xer Fit MAGNETIC X FC2916-UK, Руководство пользователя, Страница: 14 / 24

Assembly & Adjustments
HOW TO ADJUST
The Saddle Support has “Max” Sign to
show the maximum height of Saddle.
You should not exceed this height.
Unscrew the Seat Adjustment Knob
(29) a couple of turns then pull the
knob outwards to release the Saddle
Support (6). Position the Seat Support
Tube to the desired height allowing for
a slight bend in the knee at the lowest
pedal position and retighten the Seat
Adjustment Knob (29).
HOW TO FOLD
Using Locking Pin (40) to fold and
unfold the Bike. When using, the
Locking Pin (40) is in position A.
When folded, the Locking Pin (40)
is in position B.
Page 14
29
EXERCISE MONITOR FUNCTIONS
With your Cycle the single screen, 7 function Exercise Monitor is set
to start automatically when you begin to cycle.
However, it is possible to switch on the monitor by pressing the Mode
Button at the bottom of the monitor. To save battery consumption, the monitor
will also switch off after it has been idle for approximately four minutes.
Please refer to the leaflet supplied with the Exercise Monitor for all
operational functions.
LUBRICATION and MAINTENANCE
The moving parts in your Cycle are all pre-lubricated at assembly and should
not require further attention. We recommend however that the cycle is used
inside and stored in a dry condition. To clean the metal and plastic components,
a general household cleaner can be used, but please be sure to dry the cycle
and any attachments before use.
In the interest of safety, do NOT
use polish or any lubricant on
the saddle, foam handgrips
or pedals.
Note