manualshive.com logo in svg

UWT NivoRadar NR 7200 Series, Техническая информация/Инструкция по эксплуатации

Поделиться
Скачать
UWT NivoRadar NR 7200 Series Скачать руководство пользователя страница 25

NivoRadar

®

Continuous level measurement

Series NR 7200

Technical information / Instruction manual

page 25

Access protection

 

Bluetooth radio interface

Devices with a Bluetooth radio interface are protected against 
unwanted access from outside. This means that only authorized 
persons can receive measured and status values and change de-
vice settings via this interface.

A Bluetooth access code is required to establish Bluetooth commu-
nication via the adjustment tool (smartphone/tablet). This code must 
be entered once when Bluetooth communication is established for 
the first time in the adjustment tool. It is then stored in the adjust-
ment tool and does not have to be entered again.
The Bluetooth access code is individual for each device. It is printed 
on the device housing and is also supplied with the device in the 
information sheet " PINs and Codes". It can be changed by the user 
after the first connection has been established. If the Bluetooth ac-
cess code has not been entered correctly, a new entry can only be 
made after a waiting period has elapsed. The waiting time increases 
with each additional incorrect entry. 

The emergency Bluetooth access code enables Bluetooth com-
munication to be established in the event that the Bluetooth access 
code is no longer known. It can't be changed. The emergency 
Bluetooth access code can be found in information sheet " Access 
protection". If this document is lost, the emergency Bluetooth ac-
cess code can be retrieved from your personal contact person after 
legitimation. The storage and transmission of Bluetooth access 
codes is always encrypted (SHA 256 algorithm). 

 

Protection of the parameterization

The settings (parameters) of the device can be protected against 
unwanted changes. The parameter protection is deactivated on 
delivery, all settings can be made.

To protect the parameterization, the device can be locked by the 
user with the aid of a freely selectable device code. The settings 
(parameters) can then only be read out, but not changed. The de-
vice code is also stored in the adjustment tool. However, unlike the 
Bluetooth access code, it must be re-entered for each unlock. When 
using the adjustment app, the stored device code is then suggested 
to the user for unlocking.

The emergency device code allows unlocking the device in case the 
device code is no longer known. It can't be changed. The emer-
gency device code can also be found on the supplied information 
sheet " Access protection". If this document is lost, the emergency 
device code can be retrieved from your personal contact person 
after legitimation. The storage and transmission of the device codes 
is always encrypted (SHA 256 algorithm). 

Bluetooth access code

Emergency Bluetooth 

unlock code

Device code

Emergency device code

Содержание NivoRadar NR 7200 Series





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды