•
(
1
)
Make sure your dive computer
has enough battery capacity with at least 5 segments.
Note: In case your dive computer’s battery capacity is lower than 5 segments, have the battery replaced
as the software update will not load with insufficient voltage.
•
(
2
)
Switch off any battery and screen saving modes on your mobile device, as it may interrupt the
Bluetooth communication.
•
(
3
)
Activate Bluetooth on the dive computer
and on your mobile device.
•
(
4
)
Launch LogTRAK on your mobile device.
•
(
5
)
Establish connection between your dive computer and mobile device by pressing connect
SCUBAPRO.COM
ALADIN SERIES
FIRMWARE UPDATE PROCEDURE via ANDROID
ALADIN SPORT/ONE/HOSE MATRIX, ALADIN A1 & ALADIN A2
A new firmware is available for your
ALADIN
dive computer.
•
(
6
)
Once you connect and synchronize your dive computer within LogTRAK, a firmware update notification
will appear.