ColonyDoc-It Imaging Station
20
Creating Templates
Templates allow the user to set colony counting parameters so that plates with similar properties are counted
quickly and consistently.
To set a template for any Petri dish, choose
Start Colony Count
(or
Restart Colony Count
if the Petri dish has
been counted before) in the
Colony Count
module, then select the
Manual Count
function. A template can be
saved during operation
Step 1 of 2: Select classes
or
Step 2 of 2: Finish
.
To save a template in
Step 1 of 2: Select
classes,
add the desired points and classes if not
already selected) and click the
New
button in the
Template section of the window.
If additional information is needed, refer to the
Manual Count
instructions in this manual.
A
New Template
pop-up window will ask for a
new
Template name
.
Type in the new name and select
OK
.
The Template name window will close and direct
back to the
Step 1 of 2: Select classes
tab.
Click on the
Count
button to proceed to the
Step
2 of 2: Finish
tab.
