Utimaco CryptoServer Gen2 Se Series, Руководство по эксплуатации, Страница: 16 / 28

Installation of the CryptoServer Driver Software
Page 16 of 28
5 Installation of the CryptoServer Driver Software
You can find the list of all currently supported operating systems in the document
CS_PD_SecurityServer_SupportedPlatforms.pdf
on the product CD in the folder
…\Documentation\Product Details
.
The following sections describe how to install the CryptoServer Se driver in the host computer,
update it, and then remove it, under a number of different operating systems.
5.1 Installation on Windows Operating Systems
After you have installed the CryptoServer Se, the next time you restart the host computer, the
Windows operating system will recognize the new plug-in card and start the hardware
installation wizard. The installation wizard guides you through the procedure for selecting and
installing the driver.
To install or upgrade the CryptoServer driver, you need these files:
■
CryptoServer.sys
(driver program)
■
CryptoServer.inf
(installation script for Windows 32-bit) or
CryptoServer_x64.inf
(installation script for Windows 64-bit)
■ cryptoserver.cat
(catalog file)
You can find the files on the product CD in the following directory:
For 32-bit Windows operating system
Software\Windows\x86-32\Driver
.
For 64-bit WIndows operating system
Software\Windows\x86-64\Driver
.
5.1.1 Installing the Driver
You must have local Administrator rights for the host computer (Windows), where the
CryptoServer driver shall be installed on.
To install the CryptoServer driver on a computer with a Windows operating system, proceed
as follows:
1. Select the installation from the product CD supplied with the device.
2. Select one of the following directories on the product CD:
▣ For a 32 bit Windows operating system
…\Software\Windows\x86-32\Driver