Utimaco CryptoServer Gen2 Se Series, Руководство по эксплуатации, Страница: 12 / 28

Components of CryptoServer Se (PCIe)
Page 12 of 28
3 Components of CryptoServer Se (PCIe)
The CryptoServer Se consists of the following components:
1 PCI Express bus (PCIe x1) of the PCIe plug-in card
2 Battery
To supply power to the sensors and quenching system when the computer is switched
off
3 Encapsulated processor
This mechanical protection prevents cryptographic data from being manipulated or
extracted
4 Capacitor
Continues supplying power for approximately five minutes whilst a battery is being
replaced
5 Serial port
COM2
(internal)
Port, for example, for an internal chip card reader or PIN pad
6 Serial port
COM1
(external)
Port for connecting peripheral devices such as a PIN pad or a log terminal
7 USB port (external)
USB 2.0 port for peripheral devices such as a PIN pad
8 USB port (internal)
Port strip for additional USB 2.0 connection