5
3
4
5
Hardware Used
Hardware Used
Hardware Used
3. Hold the fixture pan (B) against the ceiling in position and mark the
4 mounting holes located near both ends of the fixture. Using a 1/8 drill
bit, drill 4 holes.
If no ceiling joist is encountered, using a 3/16 in. bit, drill the holes and
tap the ceiling anchors in (GG).
DO NOT
attach to ceiling at this time.
4. Pull both fixture wires through the 3/8 in. hole near the center
mounting hole. Fixture must be properly grounded. Connect fixture
ground wire (back of fixture pan) to ground wire in the electrical box
using wire nut (HH). These wires can be green or bare copper. Connect
the black supply lead with the black fixture wire and white supply lead
with the white fixture wire using wire nuts (HH). Push connections and
excess wire into the electrical box.
5. Secure the fixture pan using screw cap (EE).
BB
Ceiling Anchor
Qty. 4
HH
EE
Wire Nut
Qty. 3
Screw Cap
Qty. 1
1/8in
0,32 cm
3/16in
0,48 cm
WOOD JOIST
MOUNTING
DRYWALL
MOUNTING
B
GG
Ground
Neutral
Live
HH
HH
HH
EE
