April 2010
Page | 5
2.
TOUGHSMART MARQUEE – INSTALLATION AND WIRING
This chapter provides information and procedures on connecting power and preparing the Marquee for
serial or Ethernet communication.
2.1
A TYPICAL MARQUEE SYSTEM OVERVIEW
A typical Marquee control system comprises of a PLC (Programmable Logic Controller) to drive the logic
and a Master/Slave Marquee to display the messages based on the PLC logic. The Master Marquee itself
can drive a network of several Slaves.
Note:
A PC is only required to initially program the Marquee and the PLC.
Fig 1.3.1 A Typical Marquee System
2.2
MOUNTING THE TPRLS:
Please refer to
Chapter 3
in the ToughSmartMarquee Hardware manual for mounting and
installation information.
