Board
Diagram
Please follow the following step
Please check the following items before installation. If any missing, please contact the
dealer.
Hangers
User Manual
PoE Ethernet Repeater
1 pcs
MIT
2 pcs
1 pcs
1)
damage the device;
2) Check if the network cable and other transmission line that will be used is occupied by other
device;
3) Use a network cable to connect PoE Ethernet repeater's POE IN port with PoE Ethernet
switch;
4) Use 2 network cables to connect 2 PoE IP camears with PoE Ethernet repeater's PoE output
port respectively
5) Check if the installation is correct and device is good, make sure all the connection is reliable
and power up the system;
6) Make sure the network is normal.
Please turn off the signal source and the device's power, installation with power on may
Installation
Steps
It is a PoE Ethernet repeater, which uses advanced network cable drive and power supply
technology to extend 100M Ethernet signal to
3
00 meters, greatly extending the transmission
distance and providing PoE at the same time. It is widely used in security surveillance and
network project.
Feature
Provide 3x 10/100Mbps Ethernet ports, one PoE input port, two PoE output ports, which
can meet the requirements of local monitor, long distance transmission and PoE power
supply;
Use advanced net work cable drive technology, the longest distance up to 200m;
PoE power supply is compatible with End-Span and Mid-Span;
Meet standards of IEEE802. 3 10BASE-T, IEEE802. 3u 100BASE-TX, IEEE802. 3af/at;
Excellent circuit isolation protection, effectively improve product's lightning protection,
ESD and anti-interference ability;
Appearance and structure: solid and delicate, easily install on the wall and desktop;
Operation: plug and play, no setting required.
PoE
User Manual
Ethernet
Repeater
Notice
1
2
Please use standard Cat 5e/6 cable to get the longest transmission distance！
PoE
Ethernet
Repeater
Instruction:
Right side
VerB1.2
CA
T5
e/6
PoE
IP C
ame
ra
PoE E
thern
et R
epea
ter
PoE E
ther
net S
witc
h
100
m
100
m
PoE I
P C
ame
ra
Left side
Output Port
PoE OUT
PoE OUT
Output Port
Grounding
Terminal
PoE IN
Input Port
Device must be connected with lightning protection grounding; otherwise protection level
will reduce; please use above No.20 wire to connect the grounding terminal.
Notice
：
LED
Indicator
POE IN RJ45
POE OUT RJ45
Yellow
Green
Yellow
Green
Blink
/
Data connecting
/
Data connecting
On
PoE input
working
Cable
connecting
PoE output
working
Cable
connecting
Application
