1
2
16-Port 100M PoE+ 2-Port 1000M RJ45 Ethernet Switch
User Manual
Packing List
Please check the following items after unpacking, if any missing, please contact your local dealer.
Items
Quantity
Switch
1 pc
AC Power Cable
1 pc
Mounting Accessory
1 set
User Manual
1 pc
Product Overview
The product is 16-Port 100M PoE+ 2-Port 1000M RJ45
Ethernet Switch.
The switch provides 16 100M Ethernet RJ-45 downlink ports
and 2 Gigabit Ethernet RJ-45 uplink ports. All RJ-45 downlink
Ethernet ports support Power-over-Ethernet (PoE+) and
deliver up to 30W power per port.
The switch supports 3 working modes through DIP switch:
Default, VLAN and CCTV. It can be widely used in video
security monitoring systems, network projects, etc.
Appearances and Dimensions
Dimensions (mm)
16-Port 100M PoE+ 2-Port 1000M RJ45 Ethernet Switch
Front Panel
Rear Panel
Indicators
Indicators
Status
Descriptions
Power
Power supply indicator
On
Power supply is on
Off
Power supply is off.
Link1~16
Downlink Ethernet ports link
indicators
On
The port is linking normally.
Blink
The port is transmitting or receiving data.
Off
The port links down.
G1, G2
Uplink Ethernet ports link indicators
On
The port is linking normally.
Off
The port links down.
PoE Max
PoE Power Limit Indicator
On
When the total PoE power provided by the ports
exceeds 130W, the indicator lights up.
When the total PoE power provided by the ports
exceeds 135W, the device will stop the PoE of the
port with the largest port number.
Off
When the total PoE power provided by the ports
does not exceed 130W, the indicator turns off.
Note:
The total PoE power that the PoE ports can provide is 135W. If it exceeds 135W, the PoE of the port with the
maximum port number will be cut off. In this case, please use a lower power device to replace the original one, or
take other measures to ensure the total PoE power less than 135W. And users need to re-plug one of the other
normal connection ports to restore the PoE of the port whose power is cut off.
DIP Switch
The support supports three working modes through DIP switch.
Interfaces
Descriptions
Default
All ports are free to communicate, transmission distance: 0~100m.
VLAN
Downlink ports are isolated from each other, but can communicate with uplink ports.
Transmission distance: 0~100m. Under this mode, the PoE watchdog function is
enabled.
CCTV
The transmission distance is extended up to 250m, but the rate is limited to 10Mbps.
Under this mode, the PoE watchdog function is enabled.
