Panel Diagram
Features
2
1
8 Ports Power & HD Video
UTP
Transceiver
NO.
Component
Description
Power Supply Input
Power LED
Indicate if power supply is normal
R J45
100V-240V/50-60Hz power input connector
4
1
2
3
The green LED light on indicates working status
The yellow LED light on indicates over-current protection
8 ports power & HD video UTP transceiver can transfer HD video and power in
up to
30 m through Cat5/5e/6 cable; it provides power for remote camera, meantime return video signal.
It supports HDCVI、HDTVI AHD and
; 8 ports power & HD video UTP transceiver
adopts high quality and high capacity AC-DC power supply; each power channel has over-
current、Short circuit、over-temperature protection and over-current abnormal LED indication; it
adopts
composition extender design, which is easy for engineering installation; Small
and delicate appearance is suitable for home, office, supermarket, hotel etc.
real time
0
、
analog video
DB15
-BNC
1
Power & HD Video UTP Transceiver
User Manual
8 Ports
Transfer video and power through one Cat5/5e/6 cable
;
HDCVI HDTVI AHD and
4 in 1 Compatible design;
High quality and high capacity AC-DC power supply, providing up to 12W for each
channel;
Over-current、Short circuit、over-temperature protection and over-current abnormal
LED indication;
Excellent ESD protection;
DB15-BNC composition extended kits, easy for engineering installation.
in real time
、
、
analog video
Power
DB15
Video Output
Please check the following items before installation, if anything missing, please contact the
dealer .
8 ports power & HD video UTP Transmission Sever 1pcs
DB15-BNC cable 1pcs
1ch Power & HD video UTP
8pcs
User manual 1pcs
Power Cord 1pcs
Transmitter
1) Please turn off the signal power and display device power before installation, installing
with power will damage the transmission equipment;
2) Use DB15-BNC cable to connect DVR and Transceiver;
3) Use network cable to connect Transceiver and receiver;
4) Connect cameras with receiver;
5) Check if the installation is correct, equipment is in good condition, the connection is
stable, then power on the system;
6) Ensure the equipment powered on and work properly.
Please follow the installation steps as below:
2
3
3
4
VerB 1.2
Front board
Back board
Application
10A
250V
L
N
CCC
HD C
am
era
s
LCD
DVR
10A
250V
L
N
CCC
AC I
N
Pow
er&H
D V
ideo U
TP
Serv
er
Tran
smis
sion
Pow
er&H
D V
ideo
UTP T
rans
mitte
r
Installation step
