manualshive.com logo in svg

UTC Fire and Security interlogix AL-1191, Руководство по программированию, Страница: 24 / 24

Поделиться
Скачать
UTC Fire and Security interlogix AL-1191 Скачать руководство пользователя страница 24

Smart Card Reader

Programming Manual

18

Contacting technical support

For assistance installing, operating, maintaining, and troubleshooting this product, refer to this document and 

any other documentation provided. If you still have questions, you may contact technical support during 

normal business hours (Monday through Friday, excluding holidays, between 5 a.m. and 5 p.m. Pacific Time). 

Note:  

Be ready at the equipment before calling for technical support. 

Online publication library

Another great resource for assistance with your 

87&)LUH 

Security products is our online publication library, 

available to all of our customers on our website. To access our publication library, go to our website at the 

following location: 

http://www.utcfireandsecurity.com

In the 

Customer Support

 menu, select the 

Resource Library

 link. After you register and log on, you may 

search through our online library for the documentation you need.

1

 

Table 5.

Sales and support contact information

Sales

Technical support

Phone:

Toll-free:

 888.437.3287 in the US, including Alaska and Hawaii; Puerto Rico; Canada). 

Outside the toll-free area: 503.885.5700. 

Website 

      http://www.utcfireandsecurity.com

Fax

888.329.0331

888.329.0332

1. Many documents are provided as PDFs (portable document format). To read these documents, you will need 

Adobe Acrobat Reader, which can be downloaded free from Adobe’s website at 

www.adobe.com

. 

Содержание interlogix AL-1191

























Отзывы:

Нет отзывов