Utax DP 770 Скачать руководство пользователя страница 49

Страница: 49 / 107

3NV-2

1-3-28

U203

Checking DP operation

Description

Simulates the original conveying operation separately in the DP.

Purpose

To check the DP operation.

Method

1. Press the start key.
2. Place an original in the DP if running this simulation with paper.
3. Select the speed to be operated.

4. Select the item to be operated.

5. Press the start key. The operation starts.
6. To stop continuous operation, press the stop key.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Item No.

Description

Display

Description

Normal Speed

Normal reading (600 dpi)

High Speed

High-speed reading

Display

Description

CCD ADP

With paper, single-sided original of CCD

CCD RADP

With paper, double-sided original of CCD

CCD ADP (Non-P)

Without paper, single-sided original of CCD
(continuous operation)

CCD RADP (Non-P)

Without paper, double-sided original of CCD
(continuous operation)

Содержание DP 770












































































































Результаты поиска

Содержание DP 770

Отзывы:

Utax DP 770, Руководство по обслуживанию, Страница: 49 / 107

Результаты поиска

Содержание DP 770

Отзывы: