USTER HVI1000, Инструкция по эксплуатации, Страница: 125 / 238

USTER®
HVI 1000
Instruction Manual
Uster Technologies, Inc. Chapter 7
(5/08) Module Testing
-
Page 7-3
1 Length/Strength Module Testing
Length/Strength testing treats each comb as a sequential repetition. The
two combs are not averaged. If a comb is inadequate, clicking
Reject
Last Rep will reject the data for both combs
(M1000)
.
To access Length and Strength Module testing from the M
ODULE
T
ESTING
M
ENU
:
1. Highlight Strength in the M
ODULE
T
ESTING
list.
2. Click the Module Test button.
Figure 7-2: LS Module Testing Screen
The Module Testing Screen display is different from the one used for
System Testing. This screen displays the results from each test as well as
the average of all the tests for each cotton sample. You can perform up
to thirty (30) repetitions.
Once the Bale ID number has been entered, and the appropriately sized
cotton sample has been weighed and accepted, the LS test can begin.
As testing proceeds, the amount, mean length, length, uniformity,
strength elongation, Short Fiber Index (SFI), moisture and maturity values
are continuously updated and displayed on the screen. The Average,
Standard Deviation and Coefficient of Variation will also be displayed
for each parameter.