USTER HVI SPECTRUM, Инструкция по эксплуатации, Страница: 129 / 230

USTER
® HVI SPECTRUM
Instruction Manual
Chapter 9 Quick Reports Quick Reports
1
Introduction
1
Introduction
Test results can be viewed and/or printed at any time
during testing Test results can be viewed and/or printed at any time during testing
by selecting the Q
UICK
R
EPORT
button on an
HVI SPECTRUM
T
ESTING
screen or
MODULE TESTING
screen.
The data associated with each completed test in addition to the average
and standard deviation (if enough data is present) is displayed.
1.
While you are in a testing mode, click on the Q
UICK REPORT
button
to access the S
ELECT
Q
UICK
R
EPORT
screen.
Figure 9-1: Select Quick Report Screen - Individual
2.
Click on the radio button to the left of the type of report you want
to print (or view) from the
Report Type area on the screen.
3.
Make a selection in the Report Module area by clicking on the
radio button to the left of the report module type. In the screen
above, micronaire has been selected.
Uster Technologies, Inc. Chapter 9
Quick Reports • Page 9-1