SECTION 2 – INSPECTION
3120933 Rev. 0
USTC
2-5
8. Check instruments in truck cab for damage and
security of installation. Check PTO knob and cable
and indicator light for damage and security.
9. Inspect Load Capacity Charts, Hook Height Chart,
Area of Operation Chart and corresponding Lifting
Notes, decals and Instruction Chart for legibility and
security.
10. Check batteries for damage, loose or missing cell
caps, security and condition of cable connections
and hold down brackets, and electrolyte for proper
level. Add only clean distilled water as necessary.
WARNING: DO NOT USE AN OPEN FLAME
TO PROVIDE ILLUMINATION FOR BATTERY
CHECKS. GASES GIVEN OFF BY BATTERY ARE
EXPLOSIVE AND THEREFORE POTENTIALLY
DANGEROUS TO PERSONNEL.
WARNING: ALWAYS WEAR APPROPRIATE
EYE PROTECTION WHEN SERVICING
BATTERIES.
11. Check integral swing gear, bearing bolts and nuts
for damage and proper torque, uneven wear
patterns, correct lubrication, and proper meshing of
torque hub pinion gear.
12. Inspect turntable and pedestal for obvious damage
such as cracked welds, loose or missing hardware.
13. Check lift cylinder and hydraulic lines for damage,
evidence of leakage and security of attachment.
14. Check boom pivot bushing for evidence of correct
lubrication and shaft retainers for damage and
security. Lubricate as necessary.
15. Check hoist for damage, evidence of leakage and
security of attachment. Check for correct lay of cable
on drum. Check hydraulic lines to hoist for damage,
evidence of leakage and security of attachment.
Check cable attachment to hoist drum.
16. Inspect hydraulic/electric swivel assembly for
obstructions, damage and security of attachment.
Check for pinched wires or hoses and leakage.
17. Check telescope cylinder and lines for damage,
evidence of leakage and security of attachment.
18. Check boom structure for damage, missing or loose
parts, hardware and security of attachment.
19. Check visible wear pads for damage, excessive wear
and security of attachment.
20. Check jib extension for structural damage, security of
attachment and evidence of sheave lubrication.
21. Check boom nose sheaves for damage, security of
attachment, evidence of lubrication and correct
cable seating in sheave grooves.
22. Check all cable guards and guides for damage and
security of attachments.
23. Check anti-two-block device and any load monitor-
ing hardware, if equipped, for damage and security
of attachments.
24. Check jib stowage pins an extendable jib pin for
security of attachment.
25. Check hookblock sheave(s) for damage, correct
routing of cable around sheave grooves and
evidence of proper lubrication at sheaves and hook
swivel.
26. Check hook for damage, security of attachment and
correct hook latch operation.
27. Check lift cylinder boom attach pivot points for
evidence of lubrication.
28. Check boom rest for damage and security.
29. Check that all components requiring lubrication are
serviced as necessary.
30. Check that no unauthorized modifications have
been made to machine.
31. Check platform, if equipped, for damage, security
of attachment, and functionality, if equipped. See
Platform Safety Manual for further information.
Содержание 2500 jbt
