background image

Propane (LPG) Model

B9945L

Natural Gas Model

B9945N

UNITED STATES STOVE COMPANY

227 Industrial Park Road • P.O. Box 151 • South Pittsburg, TN 37380 • (423) 837-2100

VENT-FREE PEDESTAL GAS HEATER

 INSTALLATION AND OPERATION INSTRUCTIONS

This is an unvented gas-fired
heater.  It uses air (oxygen) from
the room in which it is installed.
Provisions for adequate combus-
tion and ventilation air must be
provided.  Refer to "Adequate
Combustion And Ventilation Air"
on page(s) 6 of this manual.

WARNING:  If the information in this manual is not
followed exactly, a fire or explosion may result
causing property damage, personal injury, or loss of
life.

~Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.
~WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.
• Do not touch any electrical switch; do not

use any phone in your building.

• Immediately call your gas supplier from a

neighbor's phone.  Follow the gas supplier's
instructions.

• If you cannot reach your gas supplier, call

the fire department.

~Installation and service must be performed by a
qualified installer, service agency, or the gas supplier.

WARNING:

Do not use a blower insert,

heat exchanger insert or other

accessories not approved

for use with this heater.

Save this manual for

future reference.

This appliance may be installed in an aftermarket* manufactured (mobile) home,

where not prohibited by state or local codes.

*Aftermarket:  Completion of sale, not for purpose of resale, from the manufacturer

This appliance is only for use with the type of gas indicated on the rating plate.  This appli-

ance is not convertible for use with other gases.

851369B    6/00

Содержание Ambiance B9945L





























Отзывы: