USR-G808 User Manual
Technical Support:
Jinan USR IOT Technology Limited
www.usriot.com
60
Reboot to restart this function; or send data to some serial port, such as: echo 123 > /dev/ttyS1
Note:
In this function, please do not delete the original tasks for the router normal running.
3.3.5. Restore to Default Factory Settings
Hardware restore:
Press Reload button over 5 seconds and release, G808 will restore default settings and reset.
Work after restart, SIM 2 LED and mandatory LED,4LAN ,WAN port light for 1s, then off.
User can also restore default settings by Web Server as follow:
Diagram 3.3.5-1 Restore default settings
Click the bottom to restore
Note:
This function is same as the hardware reload
Download backup: download current parameters files of the router to backup
Upload backup: put the files backuped into the router and work.
3.3.6. Introduce LED
20 indicators like below:
Name
Instr
Power
Supply the power and light for long time
Work
After the router work ,blink every 2s
WAN
WAN port wired and the led light, blink when communication
LAN1-4
LAN port wired and the led light, blink when communication
WLAN
When WIFI network work and keep light, blink if station access or the data transport.
2G
instr
(SIM1)
LTE modem 1 work in 2G
3G
instr
(SIM1)
LTE modem 1 work in 3G
Signal
The more SIM card 1signal instr light, the more strength the signal is.
