USR-G808 User Manual
Technical Support:
Jinan USR IOT Technology Limited
www.usriot.com
57
3.2.14.6. Rate-limiting
This function can do network speed control for specified IP and MAC. User can configure this function by Web
Server as follow:
Note: default no control
Diagram 3.2.14.6-1 Rate-limiting configuration
Function
Parameters setting (if used)
Note
Start IP
Segment limited start IP
IPV4
Stop IP
Segment limited stop IP
IPV4
Up speed rate
Limited the max up speed rate
Unit: byte/s
Down speed rate
Limited the max down speed rate
Unit:byte/s
MAC
MAC limited
Mac address of the device
Form 3.2.14.6-1 Net Control Parameters
3.3. Basic Function
3.3.1. Network Diagnosis
User can use network diagnosis function by Web Server as follow: