Wooden College Loft Bed
Assembly Instructions
Tools Needed
- Power screwdriver with a Phillips #2 medium head bit.
- Adjustable (or 9/16") wrench.
- Hammer.
Optional Items
- Sandpaper.
- Wood glue.
- Paint.
Notes
Setup takes roughly 1 hour. It is easiest if you have two people doing it. If you are not sure how to install a piece
always refer back to the picture above to see how everything fits together. Please read through the entire
instructions to familiarize yourself first before beginning assembly.
You should always check the setup instructions on our web site to make sure you have the latest version. Compare
the updated date at the top of this page with the web page updated date. If the web instructions are newer, you
should download the newer instructions.
The wood used in your loft will typically have a (good) side and a (bad) side. The bad side will usually have a lumber
grading stamp or some imperfections. Before assembly lay all the pieces out on the floor and try to position the wood
with the “good” side facing up or out. Take into consideration which side you usually will be climbing up on and place
the best rungs and legs on that side.
Pilot holes have been predrilled into all necessary pieces.
