26
Sewing Buttons
Machine Setting
Tape the button over the placement mark.
A pin can be placed on top of the foot to form a
shank.
Press down the drop feed lever and move it to
the right for dropping the feed dogs.
Set the pattern selector at " ". Align the
both holes of the button with the slot of the foot
and place the left hole of the button just below
the needle point. Lower the foot and turn the
pattern selector until the needle point comes
just above the right hole of the button. Sew
about five stitches and raise needle. Set the
pattern selector at "
" again and sew a
few stitches to lock thread.
To strengthen the shank, cut the threads leav-
ing a 20 cm ( 8") tail.
Bring the needle thread down through the hole
in the button and wind it around the shank.
Draw the thread to the wrong side and knot.
3 - 7
Содержание Fashion Stitch
Страница 1: ...INSTRUCTION BOOK...
