Appropriate use
05/20
Fl Detect RF Set
6
3
Appropriate use
Please observe the instructions in this operating manual as well as
the operating conditions and permissible data according to the data
sheet to ensure that the system functions properly and remains
operational for a long time. In case of non-observance of these
instructions as well as in case of unauthorized interventions in the
system, any liability on our part is void, as is the warranty on the
system and accessories!
The Fl Detect RF Set consists of two 868 Mhz radio water
detectors of the brand Flammex. One of the detectors is modified
and has an additional cable connection for Fl.
This wireless water detector with cable connection must be located
at the installation site of Fl and monitors e.g. the house
filter. Additional wireless water sensors can be located up to 25
meters away (depending on the environment) (bathroom, kitchen,
etc.), whereby each sensor extends the range!
If a wireless water sensor detects conductive drinking water, the
wireless water sensor with cable connection immediately blocks the
Fl and alarms all of them acoustically.
The Fl Detect RF Set contains additional parts to split the
Fl I/O connector. This allows the connection of additional
Fl accessories if required.
An alarm reset can only be done via the connected Fl or
its supply voltage.
Furthermore, the original operating instructions of the manufacturer
FlammEx at
Any other use or use beyond this is considered to be improper use.
usetech GmbH shall not be liable for any damage resulting from
such use. The risk is borne solely by the user.
