Wireless MAXg USB Adapter: User Guide
Wireless MAXg USB Adapter: User Guide
Installing BOTH a Wireless MAXg Router and Wireless MAXg USB Adapter
During the Installation procedure, you may be prompted for your Windows Operating system CD-ROM. Make
sure you have it available in case you need it.
Step One: Connect Your Router
A. Connect your DSL or Cable modem to the router:
1. Power off your computer and your modem.
2. Connect the provided antennas to the back of the router.
3. Do one of the following:
If your modem connects to your computer with an Ethernet cable
: Locate the Ethernet
cable that connects your DSL or cable modem to your computer’s Ethernet adapter, and
disconnect it from your computer only: do not disconnect the cable from your DSL or cable
modem.
If your modem connects to your computer with a USB cable
: Disconnect the USB cable
from both the modem and your computer. You will need another Ethernet cable in addition to the
one provided with the router. Connect one end of the Ethernet cable to the Ethernet port on the
back of your DSL or cable modem.
file:///G|/CSO/T-Writer%20Repository/Networking/5425%2...efresh%20USB/User%20Guide/English/install-usb-rtr.html (1 of 6)6/26/2007 9:21:31 AM