manualshive.com logo in svg

US Robotics 002605-00 -, Руководство по установке, Страница: 95 / 152

Поделиться
Скачать
US Robotics 002605-00 - Скачать руководство пользователя страница 95

U

SING 

M

ODEM 

S

TATION

91

You can change stored numbers by highlighting
them and then typing the new numbers in their
place. Once you store your numbers, you can
dial them by entering this command from
Terminal Mode:

ATDS0, ATDS1, ATDS2, etc.

Your U.S. Robotics modem comes with one
phone number already stored in Position 0. If
you haven’t changed the default, typing
ATDS0 will automatically dial the U.S.
Robotics BBS. You will want to change this if
you are using a dumb terminal or online listing
service, of course.

Once you’ve entered the numbers you wish to
store, click on Save To Modem to store them.
Click on Exit to return to the main menu.

The last option, Restore Defaults, resets your
modem to factory specifications. This option is
available from many of the screens within

Modem Station. When you select Restore
Defaults, you will see a confirmation screen
asking if you are
sure you want to Restore Defaults. Click on
OK to proceed.

TIP:

 Restore Defaults is the

“Help!! Get me outta here!!!”
option. When all else fails, Restore
Defaults will set your modem back
to factory specifications. Also,
since the default configuration is
that most commonly used, it is a
good starting place for trouble-
shooting.

Содержание 002605-00 -

























































































































































Отзывы:

Нет отзывов