US Robotics 002605-00 - Скачать руководство пользователя страница 65

Страница: 65 / 152

U.S. R

OBOTICS

ODEM

PDATE

IZARD

installed to. Make a note of this
information if you haven’t already.

•

Windows will now restart.

•

After the system finishes testing your
modem, you will see a screen indicating
that your modem was successfully
installed. Congratulations—you have
successfully updated your Winmodem!

•

When you see the screen telling you to
remove the diskette after clicking the OK
button, click OK.

•

You must now restart your system in
order to complete the installation.

If you have Windows 3.xx:

•

Remove the diskette from the drive.

•

After exiting Windows, turn off your
computer.

•

Turn on your computer and restart
Windows.

If you have Windows 95:

•

Windows will automatically shut down your
system.

•

When you see a screen saying “It’s now
safe to turn off your computer”, turn off
your computer.

•

Remove the diskette from the drive and turn
the computer back on.

14.

Windows will test your modem and then
display a screen indicating that your update
was successful.

Congratulations—you have successfully
updated your Winmodem to the latest
technology!

Содержание 002605-00 -

























































































































































Результаты поиска

Содержание 002605-00 -

Отзывы:

US Robotics 002605-00 -, Руководство по установке, Страница: 65 / 152

Результаты поиска

Содержание 002605-00 -

Отзывы: