US Digital E4T Скачать руководство пользователя страница 1

Description

The E4T miniature transmissive optical encoder is designed to provide digital
quadrature encoder feedback for high volume, limited space applications. The
E4T is designed to be a drop in replacement for the E4P that offers higher
maximum speed and increased output drive. The E4T utilizes an innovative,
push-on encoder disk which accepts shaft diameters of 2.0mm to .250".

The E4T miniature encoder base provides mounting holes for two #3-48, length
3/16" or two M2.5, length 4mm screws on a .586" bolt circle. The encoder cover
is easily snapped onto the base and is marked with the connector pin-out.

The E4T series encoder is connected using a 4-conductor, high retention,
polarized, 1.25mm pitch connector. Mating cables and connectors (see the
Cables / Connectors web page) are not included, and are available separately.

Features

Push-on hub - spring loaded collet design
Minimum shaft length of .275"
Fits shaft diameters of .079" to .250"
100 to 1000 cycles per revolution (CPR)
400 to 4000 pulses per revolution (PPR)
5V supply 

E4T

Miniature Optical Kit Encoder

Page 1 of 6

Rev. 

20181113012651

1

E4T_1630-21448-0031-E-0219

Содержание E4T









Отзывы: