28
START-UP PROCEDURE
CAUTION:
Processing food prod-
ucts can create hazardous floor condi-
tions. Provisions must be made to help
prevent the operator from slipping
while moving around the machine.
1.
All operators must have a thorough
understanding of the safe operation
of this machine (Figure 19). See “Fore-
word” on page 2 and “Safety” starting
on page 5.
2.
The safety switch system must be
tested
and in working order. All covers
and guards must be securely in place.
See “Safety Switch System Test”, page
14.
WARNING:
A qualified trained
person must check the safety switch
system for proper function before oper-
ating the machine. Serious injury such
as amputation could occur if this
system is not opreating correctly!
3.
Make sure all foreign objects and
product have been removed
from the
impeller area.
4.
Unlock the power disconnect/lockout
switch.
5.
Turn the power disconnect/lockout
switch to “I” (ON).
Only the green
“relay condition” LEDs on the amplifier
should be lit.
6.
Press the top reset button.
The reset
button must be pressed if current is inter-
rupted in any way such as: turning the
power disconnect switch off, pressing the
“EMERGENCY STOP” button or inter-
rupting the safety switch circuit by
removing a cover or guard.
7.
Press “IMPELLER START” button
(Figure 20, page 29 ).
8.
Press “FEED SCREW START” button.
9.
Press “AGITATOR START” button.
NOTE:
Feed screw and agitator will not
start unless impeller motor is running.
10.
Let machine reach full operating
speed
before feeding product.
11.
If machine fails to start,
see “Trouble-
shooting”, page 50.
OPERATION
Start-up, Stopping and Feeding
Figure 19 — Read and obey all danger and warning
instructions and symbols in this manual and on the
machine.
DANGER:
KEEP HANDS
AWAY FROM FEED OPENING
DANGER:
KEEP HANDS AWAY
FROM DISCHARGE OPENING
Содержание COMITROL 2100
