Ursalink UG87 Quick Start Guide
www.ursalink.com
15
(Note: Remember to click “OK” to finish configuration.)
4.2 Log in the Web GUI of UG87
A. Open a Web browser on your PC (Chrome and IE are recommended), type in the IP address, and press
Enter on your keyboard.
B. Enter the username and password, click “Login”.
If you enter the username or password incorrectly more than 5 times, the login page will be locked
for 10 minutes.
C. When you log in with the default username and password, you will be asked to change password. It’s
suggested that you change the password for the sake of security. Click “Cancel” button if you want to modify
it later.
⑤
Double Click “Internet Protocol
Version 4 (TCP/IPv4)” to
configure IP address and DNS
server.
⑥ Click “Use the following IP
address” to assign a static IP
manually within the same subnet of
the gateway.
