Ursalink EM500-UDL, Руководство пользователя

Страница: 15 / 28

EM500-UDL User Guide
15
5.2 Configuration via PC
Make sure “Toolbox” is downloaded on your computer.
5.2.1 Read Configuration
1. Open software “Toolbox” and click “Read” to read current information of device.
3. Attach the device to the NFC reader until Toolbox shows “success”.
Note:
Failing to read can be caused by long distance, wrong location, or rapid movement.
5.2.2 Write Configuration
1. Go to “Settings” page to change parameters as requirements and click “save”.
2. Click “Write” and enter the correct password (default password: 123456).