EM500-UDL User Guide
11
6. Click “Power On” to turn on the device or “Power Off” to turn off the device.
7. Enter password (default password:123456) and press Enter key to change device status.
4.3 Turn ON/OFF via Button
1. Remove screws on the bottom of EM500-UDL and take off the upper enclosure.
2. Find the button beside the battery.
3. Press the button until LED blinks to turn on or off the device. (about 3 seconds)
Press the button until LED blinks rapidly to reset the device to factory default. (Over 10 seconds)
5.Sensor configuration
Ursalink EM500-UDL sensor can be monitored and configured via NFC technology. In order to
protect the security of sensor, password validation is required when turning on/off the sensor or
changing configuration. Select one of the following ways to configure EM500-UDL sensors.
5.1 Configuration via Smartphone APP
Make sure Ursalink Toolbox APP is downloaded and installed on your smartphone.
Содержание EM500-UDL
Страница 1: ......
